electra cables

Overview 4-core, 7-strand unscreened security cable on a 100m roll. 4 × 7/0.20mm tinned copper conductors, PVC-sheathed. The standard lightweight cable for residential alarm system installation where shielding isn't required. Where it's used Common for residential alarm system installation — PIR sensor wiring, door...

Overview 4-core, 7-strand unscreened security cable on a 300m roll with white PVC sheath. 4 × 7/0.20mm tinned copper conductors. The 300m roll suits installers fitting out larger residential or small commercial alarm systems in one job. Where it's used Common for full-house alarm...

Overview Electra Cables flex twin cable with 24/0.20 stranded conductors and black PVC sheath. Light-duty flexible twin cable for low-voltage and small appliance applications. Built to AS/NZS 3191. Where it's used Light-duty twin flex suits small appliance lead replacements, lamp cords, and short twin...

Overview Electra Cables 0.75mm figure-8 security cable in white on a 500m drum. PVC-sheathed twin parallel construction. The larger 500m drum suits installers handling commercial alarm and security system fit-outs over multiple zones from a single cable purchase. Where it's used Larger commercial alarm...

Overview Lightweight figure-8 cable on a 100m roll with black PVC sheath. 2 × 0.75mm² stranded copper conductors in side-by-side parallel construction. Black sheath suits hidden or dark-surface installations. Where it's used Used for short alarm and signalling wiring, in-enclosure low-voltage connections, and hidden...

Overview Lightweight figure-8 cable on a 100m roll with red PVC sheath. 2 × 0.75mm² stranded copper conductors in side-by-side parallel construction. The red sheath suits installations where cable colour identification is required. Where it's used Common for fire detection signalling runs (where red...

Overview Lightweight figure-8 cable on a 100m roll with white PVC sheath. 2 × 0.75mm² stranded copper conductors in a parallel side-by-side profile. The smaller conductor size suits shorter low-voltage signalling runs where minimum cable cross-section is acceptable. Where it's used Common for short...

Overview Figure-8 (twin parallel) low-voltage cable on a 100m roll with black PVC sheath. 2 × 1.0mm² stranded copper conductors in a side-by-side figure-8 profile. Black sheath suits installations where the cable runs along dark surfaces or in concealed locations. Where it's used Used...

Overview Figure-8 (twin parallel) low-voltage cable on a 100m roll with white PVC sheath. 2 × 1.0mm² stranded copper conductors in a side-by-side figure-8 profile. Used for speaker, alarm, and low-voltage signalling installations. Where it's used Common for hard-wired alarm system siren and strobe...

Overview 0.5mm single-pair instrumentation cable with overall screen on a 100m roll. 2 × 7/0.30mm tinned copper conductors twisted, foil-shielded with drain wire, PVC-sheathed. Sized for analog signalling on longer runs. Where it's used Used for 4-20mA loop wiring, RTD sensor connections, and analog...

Overview 0.88mm single-pair instrumentation cable with overall screen on a 100m roll. 2 × 7/0.40mm tinned copper conductors twisted, foil-shielded with drain wire, PVC-sheathed. Larger conductor for longer instrumentation runs. Where it's used Used for long-run 4-20mA loops, sensor connections in larger industrial sites,...

Overview Single-pair instrumentation cable with red PVC sheath on a 100m roll. 2 × 7/0.50mm tinned copper conductors, screened, PVC-sheathed. Red colour suits fire detection and intrinsic-safety signalling where the cable identification is regulated. Where it's used Used for fire alarm signalling cable runs,...

SDI 1mm Red

SDI 6mm Black