This Schneider Charge product is a wall-mounted charging station for all electrical vehicles compliant with IEC61851-1 standard. The IP degree of protection is IP55. The IK degree of protection is IK10. The operating temperature is between -30ÁC and 50ÁC. The output type is a 5m attached cable with a T2 socket-outlet at the end, installed at the bottom and top centre of the station. The nominal output power is 7.4kW. It is supplied in single-phase (1P+N). The rated charging current is 32A under 230VAC at 50Hz/60Hz frequency. It can be used with a TN-S, TT or IT earthing system. The charging station is easy to install (no special tools required). It is recommended for private use at home, installed in the garage or on a wall externally. The dimensions are (W) 244mm x (H) 352mm x (D) 107mm. Its product weight is 4.5kg (without cable). Its color is white (RAL 9003) and green. It is fitted with a built-in protection against residual direct current (RDC-DD as Residual Direct Current Detecting Device). There is no access control to use the charging station for loading an electrical vehicle. One LED is changing color between red, green and blue in order to indicate the loading status directly on the charging station. This one allows to adjust in real time the maximum power allocated to the charging electric vehicle, according to the consumption of the rest of loads in the house and adapt the load according to Off Peak/Peak hours sent by TIC. The charging station is connected with Wiser by the Schneider ElectricTM mobile application for residential energy management. It easily starts, monitors, and controls the charging experience remotely. The OCPP 1.6 communication protocol can be used to connect to the supervision device/third party cloud. It can also be connected to Internet home router, either through Wi-Fi or RJ45 Ethernet cable.
Low Shipping Fee for most Metro areas around Australia From $14.90* WA/NT/TAS territories From $19.90*. If your postcode does not fall into this category, we will give you a call. Large, Bulky, Fragile & Heavy items shipping fee will be provided on the phone.
We dispatch on multiple courier services Monday to Friday.
Delays in postage sometimes happen but in 99% of orders you will get your item in the fastest possible time.
If Store Pickup is the only option available it means that you have items in your cart which are oversize/weight.Please contact us to get a shipping quote.
Please note: While all care is taken in the packaging and postage of your purchase, we will assume no liability arising from or in relation to any late deliveries, including expenses incurred for services provided by electricians and other contractors not party to this agreement.
We do not ship to PO Boxes or Parcel Lockers.
Any promotions on Free Shipping or flat rat delivery fee is restricted to 1 parcel up to the cubic weight of 20kg and covers sydney metro area.
*This includes 1 parcel up to the cubic weight of 20kg. Extra charges may apply for multiple items, you will be notified.
Please be aware that couriers will not call before or at the time of delivery. You are required to have an instruction to leave the parcel or a calling card will be left for you to collect from the nearest depot. A second attempt at delivery will be at your cost.
ALL PRODUCTS PURCHASED MUST BE INSTALLED BY A LICENSED ELECTRICAN, OTHERWISE PRODUCT WARRANTY IS VOID.
If the product is deemed to be faulty and is within warranty period, you may proceed in returning the product to our Branch in North Parramatta either in person or by post. Post fess to be paid by you
The product should be returned in the original packaging and with all the components it came with, coupled with a copy of the invoice.
After receiving them, we will inspect them to assess if they will be replaced. After assessment a refund or exchange will be confirmed. However we are not responsible for items that are damaged in the post or in transit.
A refund or exchange will be made at the same value as the original purchase price excluding freight fee
Unwanted & unused products? No problem you can be return the items for in store credit of the same amount of money, provided the item is returned unopened and unused in the original packaging. (Cables cannot be returned nor exchanged). Post fess to be paid by the customer.
To be exchanged, the returned products needs to be returned within 30 days from day of sale with proof of purchase.
Product warranty is governed by the respective suppliers warranty terms and conditions. ARCK Electrical Wholesale Supplies will not be liable to you or any third party for any loss suffered due to product failure and will process product warranty claims through the respective manufacturers and/or suppliers. All products available on this site must be installed by a licensed electrical tradesman / technician. DIY electrical work is illegal and all warranties are automatically voided if an unlicensed person has been found carried out the installation.